3A63 - ATLAS® Electronic Pass Lock

Application

Purpose

To provide secure locking of swinging pass doors controlled by Atlas® LCMS software or conventional key control. Atlas® LCMS software provides a range of operating functionality which can be configured to suit each site.

Overview

The 3A63 is a mortice lock of robust construction based on the Chubb Locks Custodial Services standard large mortice footprint. The main bolt extends by 25mm and is operated turning the handle to both lock and unlock. The lock is designed to accept inputs from tokens and can be programmed to enable a range of time / date driven access permissions. Locks can also be controlled remotely from a control room environment.

  • Electronic Mode - Deadlocking is achieved by closing the door and turning the handle to fully extend the bolt. Unlocking is achieved by inserting an electronic token (key) into the lock which, after authentication, an input signal is provided to lift the blocking device and withdrawing the bolt via the handle. The lock can also be configured to provide features such as auto-relock, door insecure time out etc. Additionally remote operation can be achieved via Atlas® Client / Mimic PC.
  • Manual Mode - Locking/unlocking achieved using conventional (mechanical key). Bolt withdrawal by handle. Key operates from both sides of the door
  • Manual Override - In the event of power or communication failure an override key is used to lift the electric locking unit. Both keys are supplied to a different combination and are clearly identified.

 

Specification

Features

  • Solid Case Technology; Lock case machined from single piece carbon steel.
  • Steel main bolt, with carbide anti-cutting rollers, and 25mm throw.
  • Solenoid electric locking latch.
  • Visual lock status indication via LED.
  • Intelligent lock which will continue to operate in the absence of LCMS server.
  • Independent 8-lever locking mechanism.
  • Factory restricted key section.
  • Integral baffle arrangements to resist manipulation and interference via the keyhole.

Performance

  • Mechanical locking mechanism tested to a minimum of 300,000 operations.
  • Handle mechanism tested to a minimum of 1,000,000 bolt operations
  • Solenoid locking unit tested to a minimum of 1,000,000 cycles.
  • Solenoid arrangement designed to operate at +/-10% of 24V DC regulated supply.
  • Nominal operating current 500mA .
  • Saw attack 12 hours
  • End load 13.5 kN
  • Side Load 25 kN

Additional Features

  • Robust handle and escutcheon design.
  • T-handle
  • Range of fixings including gate box, transition plates with fixings and locking plate.
  • Interchangeable mechanical inner locking unit to enable re-coding.
  • This lock is not available under a master key system.

Total Range

  • The lock is available in left or right hand variants and can be fitted to steel or wooden doors.

Dimensions & Weights

Case Height 208mm
Case Length 239mm
Case Thickness 29mm
Bolt Throw 25mm
Bolt Depth 45mm
Bolt Thickness 22mm
Weight (lock only) 10.4kg

 

Finish

  • Lock case - carbon steel electro-plated.
  • Main bolt - carbon steel electro-plated.
  • Main bolt follower high tensile brass.
  • Keys - Hardened Steel
  • Levers and springs - Brass / phosphor Bronze.

Standards