9G004 - Overhead Sliding Gate

Application

A Chubb Locks Custodial Services Ltd overhead sliding barred grille gate constructed to the standards & specifications required by the Prison Service. Typically used to secure roof voids or service areas.

Specification

Specifications, Performance Data & Tolerances

  • Conforms To The Standards & Specifications Required By The Prison Service & Ministry of Justice
  • 150mm Max Centres 30mm dia Bars
  • 460mm Max Centres 65x12mm Flat Steel Horizontal Frame Sections

Gate Leaf

  • 65x12mm Flat Steel Section Frame & Horizontals to BS EN 10025:2004
  • 30mm diameter Steel Vertical Bars to BS EN 10025:2004
  • Bars Continuously Welded at Each Intersection
  • All Steelwork Shot Blasted to BS EN ISO 11124-4:1997
  • Steel Fabrication to BS EN ISO 9001: 2000
  • Welding to BS EN 1011-2: 2001
  • Outer Steel Lock Box Continuously Welded into Gate leaf
  • Type 2 Chubb 3M56 Heavy Duty Mortice Hook Bolt Lock Operable Both Sides
  • 4no. 100mm Diameter Cast Iron Wheels

Sliding Track Gear

  • 90x90x6mm Rolled Steel Angle to BS EN 10025:2004
  • 80x90x6mm Rolled Steel Angle to BS EN 10025:2004
  • 150x6mm Steel Flat Base Plates to BS EN 10025:2004
  • All Steelwork Shot Blasted to BS EN ISO 11124-4:1997
  • Steel Fabrication to BS EN ISO 9001: 2000
  • Stitch Welded Fabrication
  • Welding to BS EN 1011-2: 2001
  • Floor Fixings 6no. M12 Chemical Resin Anchors Per Track

Slam Angle

  • 90x90x6mm Rolled Steel Angle to BS EN 10025:2004
  • 6mm thick Cold Rolled Flat Steel Gusset Plates Electro-Zinc Coated to BS EN 10152:2009
  • Hook Bolt Lock Preparation With Box To Conceal Bolt
  • All Steelwork Shot Blasted to BS EN ISO 11124-4:1997
  • Steel Fabrication to BS EN ISO 9001: 2000
  • Welding to BS EN 1011-2: 2001
  • Floor Fixings 2no. M12 Chemical Resin Anchors

Standard Dimensions

  • Structural Opening 900mm Wide x 900mm Long

Finish

  • Powder Coat Epoxy Primer to BS EN 12206-1:2004

Standards