9G001C - Medium Duty Single Gate

Application

A Chubb Locks Custodial Services Ltd medium duty single barred grille gate traditionally used in Armed Forces barracks. The design was taken from previous versions of the Police Buildings Custody Design Guide and Court Standards & Design Guide.

Specification

Specifications, Performance Data & Tolerances

  • 150mm Max Centres 20mm dia Bars
  • 470mm Max Centres 50x25x3mm Rolled Hollow Steel Horizontal Frame Sections

Gate Leaf

  • 50x25x3mm Rolled Hollow Steel Section Frame & Horizontals to BS EN 10025:2004
  • 20mm diameter Steel Vertical Bars to BS EN 10025:2004
  • Bars Continuously Welded at Each Intersection
  • All Steelwork Shot Blasted to BS EN ISO 11124-4:1997
  • Steel Fabrication to BS EN ISO 9001: 2000
  • Welding to BS EN 1011-2: 2001
  • Outer Steel Lock Box Continuously Welded into Gate leaf
  • Type 2 Chubb 3G112 Heavy Duty Mortice Lock Operable Both Sides
  • Welded Steel Lock Shroud to Protect Lock Bolt

Hinges

  • 90 degree Opening Top & Bottom Pivot Hinges
  • Bottom Hinge Ball Bearing Mounted Cast Into Floor
  • All Welds Continuous
  • Top Hinge Pin Socket Welded to Header Rail
  • Top Hinge Pin Bracketed to Wall via Header Rail & Fixed with 3no. Hilti HSL-TZ M8/20 Sleeve Anchors

Slam Angle

  • 65x50x6mm Rolled Steel Angle to BS EN 10025:2004
  • Preparation for Lock Bolt with Welded Back Box
  • All Steelwork Shot Blasted to BS EN ISO 11124-4:1997
  • Steel Fabrication to BS EN ISO 9001: 2000
  • Welding to BS EN 1011-2: 2001
  • Wall Fixings Hilti HSL-TZ CSK M8/20 Sleeve Anchors 6no. min

Standard Dimensions

  • Structural Opening 1125mm Wide x 2100mm High
  • Gate Leaf 1038mm Wide x 1875mm High Excluding Hinge(s) x 50mm Thick
  • Gate Leaf Clearance 6mm Leading Edge to Slam Angle, 75mm hinge, 75mm head/25mm Header Rail/50mm Clearance Over, 75mm undercut

 

Finish

  • Powder Coat Epoxy Primer to BS EN 12206-1:2004

Standards