9G001A - Heavy Duty Single Gate

Application

A Chubb Locks Custodial Services Ltd heavy duty single barred grille gate conforming to the Police Buildings Custody Design Guide, National Police Estates Group Best Practice Document, Court Standards & Design Guide and the standards & specifications required by the Prison Service.

Specification

Specifications, Performance Data & Tolerances

  • Conforms to the Police Buildings Custody Design Guide
  • Conforms to the National Police Estates Group Best Practice Document
  • Conforms to the Court Standards & Design Guide
  • Conforms to the standards & specifications required by the Prison Service
  • 150mm Max Centres 30mm dia Bars
  • 460mm Max Centres 65x12mm Flat Steel Horizontal Frame Sections

Gate Leaf

  • 65x12mm Flat Steel Section Frame & Horizontals to BS EN 10025:2004
  • 30mm diameter Steel Vertical Bars to BS EN 10025:2004
  • Bars Continuously Welded at Each Intersection
  • All Steelwork Shot Blasted to BS EN ISO 11124-4:1997
  • Steel Fabrication to BS EN ISO 9001: 2000
  • Welding to BS EN 1011-2: 2001
  • Anti-Spring Horns Welded to Hinge Side of Gate to Prevent Unauthorised 'Springing' of Lock
  • Gate Leading Edge to Have Anti-Lift Horn to Prevent Unauthorised lifting from Bottom Hinge Socket
  • Outer Steel Lock Box Continuously Welded into Gate leaf
  • Type 2 Chubb 3G112 Heavy Duty Mortice Lock Operable Both Sides
  • Welded Steel Lock Shroud to Protect Lock Bolt

Hinges

  • 180 degree Opening Top & Bottom Pivot Hinges
  • Bottom Hinge Ball Bearing Mounted Cast Into Floor
  • All Welds Continuous
  • Dust Cover Over Bottom Hinge Socket
  • Top Hinge Pin Locking with Phosphor Bronze Bearing
  • Top Hinge Pin Bracketed to Wall & Fixed with 3no. Hilti HSL-TZ M8/20 Sleeve Anchors

Slam Angle

  • 65x12mm Flat Steel Sections Joined to Form Angle to BS EN 10025:2004
  • Machined Solid Steel Lock Bolt Receiver
  • All Steelwork Shot Blasted to BS EN ISO 11124-4:1997
  • Steel Fabrication to BS EN ISO 9001: 2000
  • Welding to BS EN 1011-2: 2001
  • Wall Fixings Hilti HSL-TZ CSK M8/20 Sleeve Anchors 6no. min

Standard Dimensions

  • Structural Opening 1125mm Wide x 2100mm High
  • Gate Leaf 970mm Wide x 1956mm High Excluding Hinge(s) x 65mm Thick
  • Gate Leaf Clearance 55mm Leading Edge to Jamb, 100mm hinge, 69mm head, 75mm undercut

Finish

  • Powder Coat Epoxy Primer to BS EN 12206-1:2004

Standards