9D017C - Fully Glazed Corridor Fire Door 60 min Integrity

Application

A Chubb Locks Custodial Services Ltd steel fully glazed corridor fire door & glazed side panel with 60 mins fire resistance integrity for use in police custody in place of traditional barred grilles. The door incorporates large toughened laminated glass vision panels and a Type 2 Chubb 3G112 heavy duty mortice deadlock.

Specification

Specifications, Performance Data & Tolerances

  • Fire Resistance 60 mins Integrity to BS EN 1634-1:2000
  • Continuous Hinge Cyclic Tested to a Minimum 1,000,000 cycles min and to BS EN 1935 Grade 14 160kg

Door Frame

  • 100x60x4mm Hot Formed Rolled Hollow Section Steel Frame to BS EN 10025:2004
  • 40x20mm Solid Section Steel Rebates to BS EN 10025:2004
  • 75x10mm Flat Steel Threshold Section to BS EN 10025:2004 Cast into Floor
  • All Steelwork Shot Blasted to BS EN ISO 11124-4:1997
  • Steel Fabrication to BS EN ISO 9001: 2000
  • Welding to BS EN 1011-2: 2001
  • Frame Fixings Hilti HSL-TZ M8/20 Sleeve Anchors 12no. minimum per frame

Door Leaf

  • 3mm thick Cold Rolled Steel Door Skins Both Sides Electro-Zinc Coated to BS EN 10152:2009
  • 40x40x3mm & 60x40x3mm Internal Rolled Hollow Section Skeleton Framework to BS EN 10025:2004
  • Internal Skeleton Framework Shot Blast to BS EN ISO 11124-4:1997
  • Steel Fabrication to BS EN ISO 9001: 2000
  • Welding to BS EN 1011-2: 2001
  • Mineral Wool Insulation RWA45 to all Internal Voids to BS EN 13162:2001
  • Ligature Resisting Continuous Hinge either Barrel or Gear Type Capable of Supporting Weight of Door Leaf
  • 'CERTIFIRE' Approved Security Laminated Toughened Glazing
  • Intumescent Glazing Gasket
  • Glazing Frames Fixed with CSK Torx/Hex Resist Screws Stainless Steel Grade A2
  • Type 2 Chubb 3G112 Heavy Duty Mortice Deadlock Operable Both Sides
  • Recessed Pull Handle Both Sides Stainless Steel Grade 304

Fixed Side Panel

  • 3mm thick Cold Rolled Steel Door Skins Both Sides Electro-Zinc Coated to BS EN 10152:2009
  • 40x40x3mm & 60x40x3mm Internal Rolled Hollow Section Skeleton Framework to BS EN 10025:2004
  • Internal Skeleton Framework Shot Blast to BS EN ISO 11124-4:1997
  • Steel Fabrication to BS EN ISO 9001: 2000
  • Welding to BS EN 1011-2: 2001
  • Mineral Wool Insulation RWA45 to all Internal Voids to BS EN 13162:2001
  • 'CERTIFIRE' Approved Security Laminated Toughened Glazing
  • Intumescent Glazing Gasket
  • Glazing Frames Fixed with CSK Torx/Hex Resist Screws Stainless Steel Grade A2

Standard Dimensions

  • Structural Opening 1800mm Wide x 2100mm High
  • Overall Door Frame 1786mm Wide x 2093mm High (Height From Finished Floor Level as Threshold Cast into Floor)
  • Door Leaf 771mm Wide x 2020mm High Excluding Hinge(s) x 46mm Thick
  • Door Leaf Frame 910mm Wide x 2486mm High Overall from FFL
  • Side Panel 876mm Wide x 2093mm High x 46mm Thick Including Frame
  • Frame Clearance 7mm Jambs, 7mm Head
  • Door Leaf Clearance 4mm Leading Edge, 15mm hinge, 3mm head, 10mm undercut

Finish

  • Powder Coat Epoxy Primer to BS EN 12206-1:2004

Standards