9D009 - Irish Prison Cell Door

Application

A Chubb Locks Custodial Services Ltd IPS specification cell door for prison cells incorporating removable rebates, horizontal vision panel with privacy cover, inundation unit and preparation for a Class 1 Chubb cell lock. Conforms to the standards & specifications required by the Irish Prison Service.

Specification

Specifications, Performance Data & Tolerances

  • Conforms to the standards & specifications required by the Irish Prison Service

Door Frame

  • 120x60x5mm Jambs & 160x120x5mm Header Hot Rolled Hollow Section Steel Frame to BS EN 10025:2004
  • Removable 20x20x3mm Pressed Steel Angle Rebate Strips Fixed With M6 CSK Security Screws
  • Removable Solid Steel Lock Bolt Strike Plate Welded to Rebate Strips
  • All Steelwork Shot Blasted to BS EN ISO 11124-4:1997
  • 120x15mm Flat Steel Threshold Section To BS EN 10025:2004 Cast into Floor
  • Steel Fabrication to BS EN ISO 9001: 2000
  • Welding to BS EN 1011-2: 2001
  • 4mm Thick Removable Access Plate In Header With Preparation For Tamper Microswitch
  • Frame Fixings Fully Site Welded Head T16 Rebar Chemical Resin Anchors 7no.minimum per frame

Door Leaf

  • 3mm thick Cold Rolled Steel Door Skins Both Sides Electro-Zinc Coated to BS EN 10152:2009
  • 50x25x1.5mm Internal ERW Rectangular Steel Tube Skeleton Framework to BS EN 10305-3/5 Grade E220
  • Internal Skeleton Framework Shot Blast to BS EN ISO 11124-4:1997
  • Steel Fabrication to BS EN ISO 9001: 2000
  • Welding to BS EN 1011-2: 2001
  • Mineral Wool Insulation RWA50 to all Internal Voids to BS EN 13162:2001
  • Tubular Pivot Hinge Full Length of Door Leaf as IPS Specification
  • Horizontal Laminated Glass Vision Panel with Hinged Privacy Cover as IPS Specification
  • Preparation for Surface Mounted Class 1 Chubb 4L56 Mechanical Slam Action Cell Lock
  • Direct Mounting Lock Plate Welded To Corridor Side Face Of Door
  • 20mm Dia Internal Conduit With Smooth Bushed Joints For Future Electric Locking
  • Inundation Unit as IPS Specification
  • Stainless Steel Grade 304 Card Holder Riveted To Corridor Side Face
  • Preparation For Door Position Contact

Standard Dimensions

  • Structural Opening 1010mm Wide x 2260mm High
  • Overall Door Frame 990mm Wide x 2250mm High (Height From Finished Floor Level as Threshold Cast into Floor)
  • Door Leaf 834.6mm Wide CL Hinge Tube x 2077mm High x 56mm Thick
  • Frame Clearance 10mm Jambs, 10mm Head
  • Door Leaf Clearance 3mm Leading Edge, 3mm hinge, 3mm head, 10mm undercut

 

Finish

  • Powder Coat Epoxy Primer to BS EN 12206-1:2004

Standards