9D003 - Observation Cell Door

Application

A Chubb Locks Custodial Services Ltd observation cell door with two large vision panels of Home Office Type 1 specification laminated toughened glass/polycarbonate for maximum visibility, Type 1 Chubb 4L55 slam action cell lock with adjustable strike plate and continuous hinge.

Specification

Specifications, Performance Data & Tolerances

  • Glazing Gasket Holding Room Side 1.5mm Maximum and Double Sided Adhesive to Prevent Pick
  • Continuous Hinge Cyclic Tested to a Minimum 1,000,000 cycles min and to BS EN 1935 Grade 14 160kg
  • Home Office Approved Glazing Type 1 specification Laminated Toughened Glass/Polycarbonate

Door Frame

  • 125x75x8mm Rolled Steel Angle Frame to BS EN 10025:2004
  • All Steelwork Shot Blasted to BS EN ISO 11124-4:1997
  • 50x25x3mm Rolled Hollow Section Steel Rebates to BS EN 10025:2004
  • 75x10mm Flat Steel Threshold Section to BS EN 10025:2004 Cast into Floor
  • Steel Fabrication to BS EN ISO 9001: 2000
  • Welding to BS EN 1011-2: 2001
  • Frame Fixings Hilti HSL-TZ M8/20 CSK Sleeve Anchors 10no. minimum per frame
  • Home Office Approved Adjustable Strike Plate ref ARK55

Door Leaf

  • 3mm thick Cold Rolled Steel Door Skins Both Sides Electro-Zinc Coated to BS EN 10152:2009
  • 40x40x3mm & 60x40x3mm Internal Rolled Hollow Section Skeleton Framework to BS EN 10025:2004
  • Internal Skeleton Framework Shot Blast to BS EN ISO 11124-4:1997
  • Steel Fabrication to BS EN ISO 9001: 2000
  • Welding to BS EN 1011-2: 2001
  • Mineral Wool Insulation RWA45 to all Internal Voids to BS EN 13162:2001
  • Ligature Resisting Continuous Hinge either Barrel or Gear Type Capable of Supporting Weight of Door Leaf
  • Home Office Approved Glazing Type 1 specification Laminated Toughened Glass/Polycarbonate
  • Glazing Frames External fixed with CSK Torx/Hex Resist Screws Stainless Steel Grade A2
  • Type 1 Chubb 4L55 Flush Mounted Mechanical Slam Action Cell Lock with Ligature-Resisting Handle

Standard Dimensions

  • Structural Opening 910mm Wide x 2100mm High
  • Overall Door Frame 1130mm Wide x 2210mm High (Height From Finished Floor Level as Threshold Cast into Floor)
  • Door Leaf 861mm Wide x 2072mm High Excluding Hinge(s) x 46mm Thick
  • Frame Clearance 7mm Jambs, 7mm Head
  • Door Leaf Clearance 4mm Leading Edge, 15mm hinge, 3mm head, 10mm undercut

Finish

  • Powder Coat Epoxy Primer to BS EN 12206-1:2004

Standards