9D001 - Police Lambeth Cell Door

Application

A Chubb Locks Custodial Services Ltd Home Office specification cell door for police cells incorporating a full view 3 position service hatch, hit & miss vertical viewer and Type 1 Chubb 4L55 flush mounted mechanical slam action cell lock with adjustable strike plate. Conforms to the Police Buildings Custody Design Guide and National Police Estates Group Best Practice Document.

Specification

Specifications, Performance Data & Tolerances

  • Conforms to the Police Buildings Custody Design Guide
  • Conforms to the National Police Estates Group Best Practice Document
  • Gap between Door Leaf and Rebate Maximum 2mm Complies with Home Office Static Load Test
  • Gap between Sliding Hatch Plate and Hatch Aperture maximum 0.5mm
  • Continuous Hinge Cyclic Tested to a Minimum 1,000,000 cycles and to BS EN 1935 Grade 14 160kg
  • Home Office Approved Hit & Miss Vertical Viewer Glass Home Office Type 1 specification Laminated Toughened Glass/Polycarbonate
  • Home Office Approved Hatch Tested to a Minimum 400,000 cycles
  • Home Office Approved Adjustable Strike Plate 'Bounce' Test pass at Closing Speed 2 metres per sec

Door Frame

  • 125x75x8mm Rolled Steel Angle Frame to BS EN 10025:2004
  • All Steelwork Shot Blasted to BS EN ISO 11124-4:1997
  • 50x25x2mm Rolled Hollow Section Rebates Stainless Steel Grade 304 to BS EN 10088
  • All Stainless Steel 180 Grit Dull Polish RA 1.0 - 1.7 EN 1J or 2J
  • 75x10mm Flat Steel Threshold Section to BS EN 10025:2004 Cast into Floor
  • Steel Fabrication to BS EN ISO 9001: 2000
  • Welding to BS EN 1011-2: 2001
  • Frame Fixings Hilti HSL-TZ M8/20 CSK Sleeve Anchors 10no. minimum per frame
  • Home Office Approved Adjustable Strike Plate ref ARK55

Door Leaf

  • 3mm thick Cold Rolled Steel Door Skins Both Sides Electro-Zinc Coated to BS EN 10152:2009
  • 3mm thick Cold Rolled Steel Internal Kick Plates to Electro-Zinc Coated to BS EN 10152:2009
  • 0.8mm thick Additional Cell Side Door Skin Stainless Steel Grade 304 BA Pattern ref 12LG to BS EN 10088
  • 40x40x3mm & 60x40x3mm Internal Rolled Hollow Section Skeleton Framework to BS EN 10025:2004
  • Internal Skeleton Framework Shot Blast to BS EN ISO 11124-4:1997
  • Steel Fabrication to BS EN ISO 9001: 2000
  • Welding to BS EN 1011-2: 2001
  • Mineral Wool Insulation RWA45 to all Internal Voids to BS EN 13162:2001
  • Ligature Resisting Continuous Hinge either Barrel or Gear Type Capable of Supporting Weight of Door Leaf
  • Home Office Approved Hit & Miss Viewer
  • Type 1 Chubb 4L55 Flush Mounted Mechanical Slam Action Cell Lock with Ligature-Resisting Handle
  • Home Office Approved Full View 3 Position Service Hatch

Standard Dimensions

  • Structural Opening 910mm Wide x 2100mm High
  • Overall Door Frame 1130mm Wide x 2210mm High (Height From Finished Floor Level as Threshold Cast into Floor)
  • Door Leaf 861mm Wide x 2072mm High Excluding Hinge(s) x 47mm Thick
  • Frame Clearance 7mm Jambs, 7mm Head
  • Door Leaf Clearance 4mm Leading Edge, 15mm hinge, 3mm head, 10mm undercut

Finish

  • Powder Coat Epoxy Primer to BS EN 12206-1:2004

Standards