3F56

Purpose

To provide secure locking of swinging cell doors, under conventional key control where automatic deadlocking is a requirement. The lock can be configured to provide a softer aesthetic apppearance without reducing security.

Overview

The 3F56 is a mortice lock of robust construction based on the Chubb Locks Custodial Services large mortice footprint. The main bolt is automatically extended providing a 32mm throw and deadlocked on closure of the door.

Secure locking is achieved as follows:

Unlocking is achieved by a partial turn of the key which lifts the internal blocking mechanism enabling the withdrawal of the main bolt by the handle. The bolt is then retained automatically when fully retracted and door is out of frame.

Locking is achieved automatically; on closure of the door the brass snib bolt is depressed on contact with the strike plate mounted to the frame this then releases the main bolt. Deadlocking occurs when the main bolt is fully extended allowing the internal blocking mechanism to engage.

The lock has an external visual indicator mechanism, which enables staff to verify the status of the lock. When the indicator is horizontal the lock is secure any other state is insecure.

Features

Solid Case Technology; Lock case machined from single piece carbon steel.
Steel main bolt, with carbide anti-cutting rollers and 32mm throw.
Brass quick acting stud release mechanism.
External visual locking status indication.
Independent 7-lever locking mechanism.
Factory restricted key section.
Integral baffle arrangements to resist interference via the keyhole.
Escutcheon designed to give positive key alignment.

Performance

Mechanical locking mechanism tested to a minimum of 100,000 operations.
Handle mechanism tested to a minimum of 100,000 bolt operations.
Stud release mechanism tested to a minimum of 100,000 operations.

Additional Features

Range of Anti-Ligature furniture options available.
Range of fixings including gatebox, locking plate and keep.
Can be keyed to the exisitng 4L range of cell locks.
External handle designed to shear under excessive load to prevent damage to internal lock mechanism.
Interchangeable mechanical inner locking unit to enable re-coding.
Can be configured to differ, to pass or under a master key scheme.
Gate boxes for steel door applications recommended. 

Materials and finishes

Lock case - carbon steel electro-plated.
Main bolt - carbon steel electro-plated.
Main bolt follower high tensile brass.
Keys – Hardened Steel.
Levers and springs – Brass / phosphor Bronze.  

Dimensions and Weights

Bolt Throw 32mm
Bolt Depth 45mm
Bolt Thickness 22mm

TOTAL RANGE The lock is available in left or right hand variants for opening in or opening out doors and can be fitted to steel or wooden doors. For wooden door applications CLCS recommend a minimum door thickness of 54mm.
Fully dimensioned customer drawings are available on request to assist with door preparation.