9G001C Medium Duty Single Gate

Overview & Application

A Chubb Locks Custodial Services Ltd medium duty single barred grille gate traditionally used in Armed Forces barracks. The design was taken from previous versions of the Police Buildings Custody Design Guide and Court Standards & Design Guide.

Gate Leaf

50x25x3mm Rolled Hollow Steel Section Frame & Horizontals to BS EN 10025:2004

s

20mm diameter Steel Vertical Bars to BS EN 10025:2004

s

Bars Continuously Welded at Each Intersection

s

All Steelwork Shot Blasted to BS EN ISO 11124-4:1997

s

Steel Fabrication to BS EN ISO 9001: 2000

s

Welding to BS EN 1011-2: 2001

s

Outer Steel Lock Box Continuously Welded into Gate leaf

s

Type 2 Chubb 3G112 Heavy Duty Mortice Lock Operable Both Sides

s

Welded Steel Lock Shroud to Protect Lock Bolt

s

 

Hinges

90 degree Opening Top & Bottom Pivot Hinges

s

Bottom Hinge Ball Bearing Mounted Cast Into Floor

s

All Welds Continuous

s

Top Hinge Pin Socket Welded to Header Rail

s

Top Hinge Pin Bracketed to Wall via Header Rail & Fixed with 3no. Hilti HSL-TZ M8/20 Sleeve Anchors

s

 

Slam Angle

65x50x6mm Rolled Steel Angle to BS EN 10025:2004

s

Preparation for Lock Bolt with Welded Back Box

s

All Steelwork Shot Blasted to BS EN ISO 11124-4:1997

s

Steel Fabrication to BS EN ISO 9001: 2000

s

Welding to BS EN 1011-2: 2001

s

Wall Fixings Hilti HSL-TZ CSK M8/20 Sleeve Anchors 6no. min

s

 

Standard Dimensions

Structural Opening 1125mm Wide x 2100mm High

s

Gate Leaf 1038mm Wide x 1875mm High Excluding Hinge(s) x 50mm Thick

s

Gate Leaf Clearance 6mm Leading Edge to Slam Angle, 75mm hinge, 75mm head/25mm Header Rail/50mm Clearance Over, 75mm undercut

s

 

Specifications, Performance Data & Tolerances

150mm Max Centres 20mm dia Bars

s

470mm Max Centres 50x25x3mm Rolled Hollow Steel Horizontal Frame Sections

s

 

Finishes

Powder Coat Epoxy Primer to BS EN 12206-1:2004

s

 

Options

Alternative Sizes Available

o

Right Hand or Left Hand

o

Polyester Powder Coat Matt 30% Gloss to Any Standard RAL No. to BS EN 12206-1:2004

o

Hot Dip Galvanised to BS EN ISO 1461: 2009

o

Alternative Chemical Resin Frame Fixings

o

180 degree Pivot Hinges in Lieu of 90 degree

o

Heavy Duty Wall Mounted Door Stop

o

Supplied Prepared for Lock Only, Lock Supplied & Fitted by Others

o

Heavy Duty Fail-Secure Electric Strike 12v DC Monitored for Keyless Access Control*

o

Type 2 Chubb 3G112 Monitored Lock *

o

Type 1 Chubb 3R63 Electro-Mechanical Lock*

o

Type 1 Chubb 3A63 ATLAS Intelligent Electro-Mechanical Lock*

o

Overhead Hydraulic Door Closer with Adjustable Closing Force EN 3-6 and Back Check*

o

 

Warranties

Defects 12 Months Product Subject to Correct Maintenance and Installation if Applicable Excluding Wilful Damage Caused by Operator or Detainee and Any Paint Decoration & Hardware Supplied by Others if Applicable

s

Start Date From Practical Completion on New Build Projects or Installation on Refurbishment/Upgrade Projects

s

Extended Warranties Available

o