9G001B Heavy Duty Gate with Side Panel

Overview & Application

A Chubb Locks Custodial Services Ltd heavy duty barred grille gate with side panel conforming to the Police Buildings Custody Design Guide, National Police Estates Group Best Practice Document, Court Standards & Design Guide and the standards & specifications required by the Prison Service.

Gate Leaf

65x12mm Flat Steel Section Frame & Horizontals to BS EN 10025:2004

s

30mm diameter Steel Vertical Bars to BS EN 10025:2004

s

Bars Continuously Welded at Each Intersection

s

All Steelwork Shot Blasted to BS EN ISO 11124-4:1997

s

Steel Fabrication to BS EN ISO 9001: 2000

s

Welding to BS EN 1011-2: 2001

s

Anti-Spring Horns Welded to Hinge Side of Gate to Prevent Unauthorised ‘Springing’ of Lock

s

Gate Leading Edge to Have Anti-Lift Horn to Prevent Unauthorised lifting from Bottom Hinge Socket

s

Outer Steel Lock Box Continuously Welded into Gate leaf

s

Type 2 Chubb 3G112 Heavy Duty Mortice Lock Operable Both Sides

s

Welded Steel Lock Shroud to Protect Lock Bolt

s

 

Side Panel

65x12mm Flat Steel Section Frame & Horizontals to BS EN 10025:2004

s

30mm diameter Steel Vertical Bars to BS EN 10025:2004

s

Bars Continuously Welded at Each Intersection

s

65x12 Flat Steel Sections Joined to Form Slam Angle to BS EN 10025:2004

s

Machined Solid Steel Lock Bolt Receiver

s

All Steelwork Shot Blasted to BS EN ISO 11124-4:1997

s

Steel Fabrication to BS EN ISO 9001: 2000

s

Welding to BS EN 1011-2: 2001

s

Anti-Spring Horns Welded to Wall Side of Side Panel to Prevent Unauthorised ‘Springing’ of Lock

s

6mm thick Top & Bottom Fixing Plates to BS EN 10025:2004

s

Floor & Head Fixings Hilti HSL-TZ M8/20 Sleeve Anchors

s

 

Hinges

180 degree Opening Top & Bottom Pivot Hinges

s

Bottom Hinge Ball Bearing Mounted Cast Into Floor

s

All Welds Continuous

s

Dust Cover Over Bottom Hinge Socket

s

Top Hinge Pin Locking with Phosphor Bronze Bearing

s

Top Hinge Pin Bracketed to Wall & Fixed with 3no. Hilti HSL-TZ M8/20 Sleeve Anchors

s

 

Standard Dimensions

Structural Opening 2100mm Wide x 2100mm High

s

Gate Leaf 912mm Wide x 1956mm High Excluding Hinge(s) x 65mm Thick

s

Gate Leaf Clearance 8mm Leading Edge to Slam, 100mm hinge, 69mm head, 75mm undercut

s

Side Panel 980mm Wide x 2100mm High from FFL

s

Side panel Clearance 100mm to Jamb

s

 

Specifications, Performance Data & Tolerances

Conforms to the Police Buildings Custody Design Guide

s

Conforms to the National Police Estates Group Best Practice Document

s

Conforms to the Court Standards & Design Guide

s

Conforms to the standards & specifications required by the Prison Service

s

150mm Max Centres 30mm dia Bars

s

460mm Max Centres 65x12mm Flat Steel Horizontal Frame Sections

s

 

Finishes

Powder Coat Epoxy Primer to BS EN 12206-1:2004

s

 

Options

Alternative Sizes Available

o

Right Hand or Left Hand

o

Polyester Powder Coat Matt 30% Gloss to Any Standard RAL No. to BS EN 12206-1:2004

o

Hot Dip Galvanised to BS EN ISO 1461: 2009

o

Side Panels Both Sides of Gate Leaf

o

Overhead Fixed Header Panel

o

Double Leaf Gate with Joggle Bolts

o

Alternative Chemical Resin Frame Fixings

o

90 degree Pivot Hinges in Lieu of 180 degree

o

Heavy Duty Wall Mounted Door Stop

o

Supplied Prepared for Lock Only, Lock Supplied & Fitted by Others

o

Heavy Duty Fail-Secure Electric Strike 12v DC Monitored for Keyless Access Control*

o

Type 2 Chubb 3G112 Monitored Lock *

o

Type 1 Chubb 3R63 Electro-Mechanical Lock*

o

Type 1 Chubb 3A63 ATLAS Intelligent Electro-Mechanical Lock*

o

Overhead Hydraulic Door Closer with Adjustable Closing Force EN 3-6 and Back Check*

o

 

Warranties

Defects 12 Months Product Subject to Correct Maintenance and Installation if Applicable Excluding Wilful Damage Caused by Operator or Detainee and Any Paint Decoration & Hardware Supplied by Others if Applicable

s

Start Date From Practical Completion on New Build Projects or Installation on Refurbishment/Upgrade Projects

s

Extended Warranties Available

o