9D004 Holding Room Door

Overview & Application

A Chubb Locks Custodial Services Ltd Home Office specification door for police holding rooms incorporating a 150mm square laminated glass vision panel with privacy cover, recessed pull handle and Type 2 Chubb 3G112 heavy duty mortice deadlock. Conforms to the Police Buildings Custody Design Guide and National Police Estates Group Best Practice Document.

Door Frame

125x75x8mm Rolled Steel Angle Frame to BS EN 10025:2004

s

25x25x3mm Rolled Hollow Section Steel Rebates to BS EN 10025:2004

s

All Steelwork Shot Blasted to BS EN ISO 11124-4:1997

s

75x10mm Flat Steel Threshold Section to BS EN 10025:2004 Cast into Floor

s

Steel Fabrication to BS EN ISO 9001: 2000

s

Welding to BS EN 1011-2: 2001

s

Frame Fixings Hilti HSL-TZ M8/20 CSK Sleeve Anchors 10no. minimum per frame

s

 

Door Leaf

1.6mm thick Cold Rolled Steel Door Skins Both Sides & All Edges Hot Dip Zinc Coated to BS EN 10346:2009

s

44mm thick Solid Timber Door Core Mixed Tropical 3 Layer Lamels Hardwood Rails & Stiles

s

Door Core Density 460 – 500kg/m3

s

Heat Pressure Bonded 80C @ 500lbs/in2 for 7mins

s

Adhesive Apollo A9267 PU

s

Ligature Resisting Continuous Hinge either Barrel or Gear Type Capable of Supporting Weight of Door Leaf

s

150mm Square Laminated Glass & Polycarbonate Vision Panel with Hinged Steel Privacy Cover

s

Type 2 Chubb 3G112 Heavy Duty Mortice Lock Operable Corridor Side Only

s

Recessed Pull Handle Corridor Side Cast Stainless Steel Grade 304

s

 

Standard Dimensions

Structural Opening 910mm Wide x 2100mm High

s

Overall Door Frame 1130mm Wide x 2210mm High (Height From Finished Floor Level as Threshold Cast into Floor)

s

Door Leaf 861mm Wide x 2072mm High Excluding Hinge(s) x 46mm Thick

s

Frame Clearance 7mm Jambs, 7mm Head

s

Door Leaf Clearance 4mm Leading Edge, 15mm hinge, 3mm head, 10mm undercut

s

 

Specifications, Performance Data & Tolerances

Conforms to the Police Buildings Custody Design Guide

s

Conforms to the National Police Estates Group Best Practice Document

s

Gap between Door Leaf and Rebate Maximum 2mm Complies with Home Office Static Load Test

s

Continuous Hinge Cyclic Tested to a Minimum 1,000,000 cycles min and to BS EN 1935 Grade 14 160kg

s

Home Office Approved Glass Home Type 1 specification Laminated Toughened Glass/Polycarbonate

s

 

Finishes

Powder Coat Epoxy Primer to BS EN 12206-1:2004

s

 

Options

Alternative Sizes Available

o

Right Hand Open-Out or Left Hand Open-Out (Open-In Not Permitted)

o

Polyester Powder Coat Matt 30% Gloss to Any Standard RAL No. to BS EN 12206-1:2004

o

Adjustable Rebates 25x25mm Solid Stainless Steel Grade 304 to BS EN 10088

o

50x25x2mm Rolled Hollow Section Rebates Stainless Steel Grade 304 to BS EN 10088

o

1.6mm thick Polished Stainless Steel Cell Side Door Skin Grade 304 to BS EN 10088

o

Door Position Contact Switch

o

Home Office Approved Hit & Miss Viewer

o

Ligature Resisting Gasket Free Circular Viewer with Swivel Cover

o

Alternative Chemical Resin Frame Fixings

o

Heavy Duty Wall Mounted Door Stop

o

Type 2 Chubb 3G112 Monitored Lock with Wired Hinge

o

 

Warranties

Defects 12 Months Product Subject to Correct Maintenance and Installation if Applicable Excluding Wilful Damage Caused by Operator or Detainee and Any Paint Decoration & Hardware Supplied by Others if Applicable

s

Start Date From Practical Completion on New Build Projects or Installation on Refurbishment/Upgrade Projects

s

Extended Warranties Available

o