9D003 Observation Door

Overview & Application

A Chubb Locks Custodial Services observation cell door with two large vision panels of Home Office Type 1 specification laminated toughened glass/polycarbonate for maximum visibility, Type 1 Chubb 4L55 slam action cell lock with adjustable strike plate and continuous hinge.

Door Frame

125x75x8mm Rolled Steel Angle Frame to BS EN 10025:2004

s

All Steelwork Shot Blasted to BS EN ISO 11124-4:1997

s

50x25x3mm Rolled Hollow Section Steel Rebates to BS EN 10025:2004

s

75x10mm Flat Steel Threshold Section to BS EN 10025:2004 Cast into Floor

s

Steel Fabrication to BS EN ISO 9001: 2000

s

Welding to BS EN 1011-2: 2001

s

Frame Fixings Hilti HSL-TZ M8/20 CSK Sleeve Anchors 10no. minimum per frame

s

Home Office Approved Adjustable Strike Plate ref ARK55

s

 

Door Leaf

3mm thick Cold Rolled Steel Door Skins Both Sides Electro-Zinc Coated to BS EN 10152:2009

s

40x40x3mm & 60x40x3mm Internal Rolled Hollow Section Skeleton Framework to BS EN 10025:2004

s

Internal Skeleton Framework Shot Blast to BS EN ISO 11124-4:1997

s

Steel Fabrication to BS EN ISO 9001: 2000

s

Welding to BS EN 1011-2: 2001

s

Mineral Wool Insulation RWA45 to all Internal Voids to BS EN 13162:2001

s

Ligature Resisting Continuous Hinge either Barrel or Gear Type Capable of Supporting Weight of Door Leaf

s

Home Office Approved Glazing Type 1 specification Laminated Toughened Glass/Polycarbonate

s

Glazing Frames External fixed with CSK Torx/Hex Resist Screws Stainless Steel Grade A2

s

Type 1 Chubb 4L55 Flush Mounted Mechanical Slam Action Cell Lock with Ligature-Resisting Handle

s

 

Standard Dimensions

Structural Opening 910mm Wide x 2100mm High

s

Overall Door Frame 1130mm Wide x 2210mm High (Height From Finished Floor Level as Threshold Cast into Floor)

s

Door Leaf 861mm Wide x 2072mm High Excluding Hinge(s) x 46mm Thick

s

Frame Clearance 7mm Jambs, 7mm Head

s

Door Leaf Clearance 4mm Leading Edge, 15mm hinge, 3mm head, 10mm undercut

s

 

Specifications, Performance Data & Tolerances

Glazing Gasket Holding Room Side 1.5mm Maximum and Double Sided Adhesive to Prevent Pick

s

Continuous Hinge Cyclic Tested to a Minimum 1,000,000 cycles min and to BS EN 1935 Grade 14 160kg

s

Home Office Approved Glazing Type 1 specification Laminated Toughened Glass/Polycarbonate

s

 

Finishes

Powder Coat Epoxy Primer to BS EN 12206-1:2004

s

 

Options

Alternative Sizes Available

o

Right Hand Open-Out or Left Hand Open-Out (Open-In Not Permitted)

o

Polyester Powder Coat Matt 30% Gloss to Any Standard RAL No. to BS EN 12206-1:2004

o

Polished Stainless Steel Internal Door/Side panel Skins Grade 304 to BS EN 10088

o

Adjustable Rebates 25x25mm Solid Stainless Steel Grade 304 to BS EN 10088

o

50x25mm Rolled Hollow Section Rebates Stainless Steel Grade 304 to BS EN 10088 Satin Polished

o

Intelligent Electronic Privacy Glass Glazing in conjunction with Home Office Type 1 specification Laminated Toughened Glass/Polycarbonate

o

Door Position Contact Switch

o

Alternative Chemical Resin Frame Fixings

o

Heavy Duty Wall/Floor Mounted Door Stop

o

Type 2 Chubb 3G112 Heavy Duty Mortice Deadlock

o

Type 2 Chubb 3G112 Monitored Lock with Wired Hinge

o

Type 1 Chubb 4L79 Flush Mounted Electro-Mechanical Slam Action Cell Lock with Wired Hinge

o

Type 1 Chubb 4A79 ATLAS Flush Mounted Intelligent Electro-Mechanical Slam Action Cell Lock with Wired Hinge

o

 

Warranties

Defects 12 Months Product Subject to Correct Maintenance and Installation if Applicable Excluding Wilful Damage Caused by Operator or Detainee and Any Paint Decoration & Hardware Supplied by Others if Applicable

s

Start Date From Practical Completion on New Build Projects or Installation on Refurbishment/Upgrade Projects

s

Extended Warranties Available

o