9D002 Vulnerable Detainee Cell Door

Overview & Application

A Chubb Locks Custodial Services Ltd Home Office specification cell door for vulnerable detainee police cells incorporating a 2 position service hatch, large vision panel with sliding cover and Type 1 Chubb 4L55 flush mounted mechanical slam action cell lock with adjustable strike plate. Conforms to the Police Buildings Custody Design Guide and National Police Estates Group Best Practice Document.

Door Frame

125x75x8mm Rolled Steel Angle Frame to BS EN 10025:2004

s

All Steelwork Shot Blasted to BS EN ISO 11124-4:1997

s

50x25x2mm Rolled Hollow Section Rebates Stainless Steel Grade 304 to BS EN 10088

s

All Stainless Steel 180 Grit Dull Polish RA 1.0 – 1.7 EN 1J or 2J

s

75x10mm Flat Steel Threshold Section to BS EN 10025:2004 Cast into Floor

s

Steel Fabrication to BS EN ISO 9001: 2000

s

Welding to BS EN 1011-2: 2001

s

Frame Fixings Hilti HSL-TZ M8/20 CSK Sleeve Anchors 10no. minimum per frame

s

Home Office Approved Adjustable Strike Plate ref ARK55

s

 

Door Leaf

3mm thick Cold Rolled Steel Door Skin Corridor Side Electro-Zinc Coated to BS EN 10152:2009

s

3mm thick Stainless Steel Cell Side Door Skin Grade 304 to BS EN 10088

s

Stainless Steel Door Skin 180 Grit Dull Polish RA 1.0 – 1.7 EN 1J or 2J

s

40x40x3mm & 60x40x3mm Internal Rolled Hollow Section Skeleton Framework to BS EN 10025:2004

s

Internal Skeleton Framework Shot Blast to BS EN ISO 11124-4:1997

s

Steel Fabrication to BS EN ISO 9001: 2000

s

Welding to BS EN 1011-2: 2001

s

Mineral Wool Insulation RWA45 to all Internal Voids to BS EN 13162:2001

s

Ligature Resisting Continuous Hinge either Barrel or Gear Type Capable of Supporting Weight of Door Leaf

s

Home Office Approved Vision Panel with Sliding Privacy Cover & Hit & Miss Viewer

s

Type 1 Chubb 4L55 Flush Mounted Mechanical Slam Action Cell Lock with Ligature-Resisting Handle

s

Home Office Approved 2 Position Service Hatch

s

Heavy Duty Rubber Door Stops to Protect Vision Panel Sliding Cover

s

 

Standard Dimensions

Structural Opening 910mm Wide x 2100mm High

s

Overall Door Frame 1130mm Wide x 2210mm High (Height From Finished Floor Level as Threshold Cast into Floor)

s

Door Leaf 861mm Wide x 2072mm High Excluding Hinge(s) x 46mm Thick

s

Frame Clearance 7mm Jambs, 7mm Head

s

Door Leaf Clearance 4mm Leading Edge, 15mm hinge, 3mm head, 10mm undercut

s

 

Specifications, Performance Data & Tolerances

Conforms to the Police Buildings Custody Design Guide

s

Conforms to the National Police Estates Group Best Practice Document

s

Gap between Door Leaf and Rebate Maximum 2mm Complies with Home Office Static Load Test

s

Gap between Sliding Hatch Plate and Hatch Aperture maximum 0.5mm

s

Continuous Hinge Cyclic Tested to a Minimum 1,000,000 cycles min and to BS EN 1935 Grade 14 160kg

s

Home Office Approved Glass Home Office Type 1 specification Laminated Toughened Glass/Polycarbonate

s

Home Office Approved Hatch Tested to a Minimum 400,000 cycles

s

Home Office Approved Adjustable Strike Plate ‘Bounce’ Test pass at Closing Speed 2 metres per sec

s

 

Finishes

Powder Coat Epoxy Primer to BS EN 12206-1:2004

s

 

Options

Alternative Sizes Available

o