9D001 Lambeth Cell Door

Overview and Application


Home Office specification cell door for police cells incorporating a full view 3 position service hatch, hit & miss vertical viewer and Type 1 Chubb 4L55 flush mounted mechanical slam action cell lock with adjustable strike plate. Conforms to the Police Buildings Custody Design Guide and National Police Estates Group Best Practice Document.

Door Frame

125x75x8mm Rolled Steel Angle Frame to BS EN 10025:2004

s

All Steelwork Shot Blasted to BS EN ISO 11124-4:1997

s

50x25x2mm Rolled Hollow Section Rebates Stainless Steel Grade 304 to BS EN 10088

s

All Stainless Steel 180 Grit Dull Polish RA 1.0 – 1.7 EN 1J or 2J

s

75x10mm Flat Steel Threshold Section to BS EN 10025:2004 Cast into Floor

s

Frame Fixings Hilti HSL-TZ M8/20 CSK Sleeve Anchors 10no. minimum per frame

s

 

Door Leaf

3mm thick Cold Rolled Steel Door Skins Both Sides Electro-Zinc Coated to BS EN 10152:2009

s

3mm thick Cold Rolled Steel Internal Kick Plates to Electro-Zinc Coated to BS EN 10152:2009

s

0.8mm thick Additional Cell Side Door Skin Stainless Steel Grade 304 BA Pattern ref 12LG to BS EN 10088

s

40x40x3mm & 60x40x3mm Internal Rolled Hollow Section Skeleton Framework to BS EN 10025:2004

s

Internal Skeleton Framework Shot Blast to BS EN ISO 11124-4:1997

s

Mineral Wool Insulation RWA45 to all Internal Voids to BS EN 13162:2001

s

Ligature Resisting Continuous Hinge either Barrel or Gear Type Capable of Supporting Weight of Door Leaf

s

Home Office Approved Hit & Miss Viewer

s

Type 1 Chubb 4L55 Flush Mounted Mechanical Slam Action Cell Lock with Ligature-Resisting Handle

s

Home Office Approved Adjustable Strike Plate

s

Home Office Approved Full View 3 Position Service Hatch

s

 

Specifications, Performance Data & Tolerances

Conforms to the Police Buildings Custody Design Guide

s

Conforms to the National Police Estates Group Best Practice Document

s

Gap between Door Leaf and Rebate maximum 2mm with static applied load 10  KN

s

Gap between Sliding Hatch Plate and Hatch Aperture maximum 0.5mm

s

Continuous Hinge Cyclic Tested to a Minimum 1,000,000  cycles min  door leaf weight 135 kg BS EN 1935 Grade

s

Home Office Approved Hit & Miss Vertical Viewer Glass Home Office Type 1 specification Laminated Toughened Glass/Polycarbonate

s

Home Office Approved Hatch Tested to a Minimum 400,000 cycles

s

Home Office Approved Adjustable Strike Plate ‘Bounce’ Test pass at Closing Speed 2 metres per sec

s

 

Finishes

Powder Coat Epoxy Primer to BS EN 12206-1:2004

s

 

Options

Polyester Powder Coat Matt to Standard RAL No. to BS EN 12206-1:2004

o

Adjustable Rebates 25x25mm Solid Stainless Steel Grade 304 to BS EN 10088

o

Home Office Approved 2 Position Service Hatch

o

Home Office Approved 2+1 Position Service Hatch

o

Hatch Plate Position Contact Switch for Life Signs Monitoring

o

Door Position Contact Switch

o

Ligature Resisting Gasket Free Circular Viewer with Swivel Cover

o

Alternative Chemical Resin Frame Fixings

o

Heavy Duty Wall Mounted Door Stop

o

Type 1 Chubb 4L56 Surface Mounted Mechanical Slam Action Cell Lock & Surface Mounted Adjustable Strike Plate

o

Type 1 Chubb 4L79 Flush Mounted Electro-Mechanical Slam Action Cell Lock with Wired Hinge

o

Type 1 Chubb 4A79 ATLAS Flush Mounted Intelligent Electro-Mechanical Slam Action Cell Lock with Wired Hinge

o