9D017C Fully Glazed Corridor Steel Fire Door FD60

Overview & Application

A Chubb Locks Custodial Services Ltd steel fully glazed corridor fire door & glazed side panel with 60 mins fire resistance integrity for use in police custody in place of traditional barred grilles. The door incorporates large toughened laminated glass vision panels and a Type 2 Chubb 3G112 heavy duty mortice deadlock.

Door Frame

100x60x4mm Hot Formed Rolled Hollow Section Steel Frame to BS EN 10025:2004

s

40x20mm Solid Section Steel Rebates to BS EN 10025:2004

s

75x10mm Flat Steel Threshold Section to BS EN 10025:2004 Cast into Floor

s

All Steelwork Shot Blasted to BS EN ISO 11124-4:1997

s

Steel Fabrication to BS EN ISO 9001: 2000

s

Welding to BS EN 1011-2: 2001

s

Frame Fixings Hilti HSL-TZ M8/20 Sleeve Anchors 12no. minimum per frame

s

 

Door Leaf

3mm thick Cold Rolled Steel Door Skins Both Sides Electro-Zinc Coated to BS EN 10152:2009

s

40x40x3mm & 60x40x3mm Internal Rolled Hollow Section Skeleton Framework to BS EN 10025:2004

s

Internal Skeleton Framework Shot Blast to BS EN ISO 11124-4:1997

s

Steel Fabrication to BS EN ISO 9001: 2000

s

Welding to BS EN 1011-2: 2001

s

Mineral Wool Insulation RWA45 to all Internal Voids to BS EN 13162:2001

s

Ligature Resisting Continuous Hinge either Barrel or Gear Type Capable of Supporting Weight of Door Leaf

s

CERTIFIRE’ Approved Security Laminated Toughened Glazing

s

Intumescent Glazing Gasket

s

Glazing Frames Fixed with CSK Torx/Hex Resist Screws Stainless Steel Grade A2

s

Type 2 Chubb 3G112 Heavy Duty Mortice Deadlock Operable Both Sides

s

Recessed Pull Handle Both Sides Stainless Steel Grade 304

s

 

Fixed Side Panel

3mm thick Cold Rolled Steel Door Skins Both Sides Electro-Zinc Coated to BS EN 10152:2009

s

40x40x3mm & 60x40x3mm Internal Rolled Hollow Section Skeleton Framework to BS EN 10025:2004

s

Internal Skeleton Framework Shot Blast to BS EN ISO 11124-4:1997

s

Steel Fabrication to BS EN ISO 9001: 2000

s

Welding to BS EN 1011-2: 2001

s

Mineral Wool Insulation RWA45 to all Internal Voids to BS EN 13162:2001

s

CERTIFIRE’ Approved Security Laminated Toughened Glazing

s

Intumescent Glazing Gasket

s

Glazing Frames Fixed with CSK Torx/Hex Resist Screws Stainless Steel Grade A2

s

 

Standard Dimensions

Structural Opening 1800mm Wide x 2100mm High

s

Overall Door Frame 1786mm Wide x 2093mm High (Height From Finished Floor Level as Threshold Cast into Floor)

s

Door Leaf 771mm Wide x 2020mm High Excluding Hinge(s) x 46mm Thick

s

Door Leaf Frame 910mm Wide x 2486mm High Overall from FFL

s

Side Panel 876mm Wide x 2093mm High x 46mm Thick Including Frame

s

Frame Clearance 7mm Jambs, 7mm Head

s

Door Leaf Clearance 4mm Leading Edge, 15mm hinge, 3mm head, 10mm undercut

s

 

Specifications, Performance Data & Tolerances

Fire Resistance 60 mins Integrity to BS EN 1634-1:2000

s

Continuous Hinge Cyclic Tested to a Minimum 1,000,000 cycles min and to BS EN 1935 Grade 14 160kg

s

 

Finishes

Powder Coat Epoxy Primer to BS EN 12206-1:2004

s

 

Options

Alternative Sizes Available

o

Right Hand or Left Hand

o

Polyester Powder Coat Matt 30% Gloss to Any Standard RAL No. to BS EN 12206-1:2004

o

Door Position Contact Switch

o

Heavy Duty Fail-Secure Electric Strike 12v DC Monitored for Keyless Access Control

o

Type 2 Chubb 3G112 Monitored Lock with Wired Hinge

o

Glazed Fixed Side Panel Hinge or Slam Side of Door

o

Overhead Hydraulic Door Closer with Adjustable Closing Force EN 3-6 and Back Check

o

Smoke Seals

o

Heavy Duty Wall/Floor Door Stop

o

 

Warranties

Defects 12 Months Product Subject to Correct Maintenance and Installation if Applicable Excluding Wilful Damage Caused by Operator or Detainee and Any Paint Decoration & Hardware Supplied by Others if Applicable

s

Start Date From Practical Completion on New Build Projects or Installation on Refurbishment/Upgrade Projects

s

Extended Warranties Available

o